Corundum Maintenance

1, no mess with non-neutral health agent.
For the sake of rapid health effects, general health agents are rich in acidity, so if prolonged use of ingredients of unknown health agent, will make corundum stone exterior gloss lost, and because of non-neutral future occurrence of pharmaceutical residues is the main cause of corundum stone disease.
2, no free waxing.
December varieties on the market where many water-based wax, stearic acid wax, oil wax, acrylic wax and so on. These are basically wax containing acid substances. Not only can clog the pores breathing stone, stained with dust and dirt will constitute a wax scale, constitutes a yellow stone exterior appearance occurred. However, if the flow of pedestrians and goods must place a high frequency of waxing, it must protect the company professional advice and counseling with wax protection.
3, no longer cover up carpet, debris.
To adhere to the corundum stone breathe smoothly, should avoid prolonged corundum stone surface covered carpet and debris, otherwise stone after stone pores under the moisture can not evaporate. The stone due to excessive moisture, water content increased occurrence of annoying stone disease problems If you are bound to carpeting, stacked debris, please do not forget to constant change.
4, to fully adhere to clean and hygienic.
Whether rugged granite texture (hardness HRs88-1114-7) or the soft texture of marble (hardness HRs46-773-5) were resistant to wind sand and soil particles long ruined. Thus when the use of either dust and electrostatic dust mop quite ready and hygiene tasks. Best commercial space can be placed on imports into the dust pad, too involved brought the sand filter shoes Best home after entry into slippers, cut sand stone dust wear the timing of the appearance.
5, to regular protection, protective sheen.
Dust alone, health is not so bright shiny stone corundum continue to adhere to subside. So be sure to regularly invite professional companies to do protection and regeneration gloss protection tasks such as: the use of liquid crystals allow marble surface recrystallization, or use polishing powder for marble or granite surface regeneration gloss, or use polishing powder for marble or flower granite surface regeneration gloss, or gloss using breathable protection and the like. Can make your corundum stone such as new forever.
6, to immediately eradicate pollution.
Everything all have natural corundum stone pores, pollution (oil, tea, coffee, cola, soy sauce, ink, etc.) will be very simple and soaked into the stone house along the pores constitute nasty stains, so be sure to choose good quality The stone dedicated protectant applied as to avoid pollution contamination in stone stone. To know everything prolonged denial protectants are not a 100% pollution, so if there is pollution on the stone must be poured immediately clear, in order to avoid entering the pores of the stone inside.
7, repellant quality must be curious attention.
8, applied for protection to regular disposal.
To ensure a long life expectancy of stone, block the penetration of water and pollution, we must regularly (depending on the quality of the best varieties of stone and Protectant 1 - 3 years to do a - 2 This disposition) disposal facilities for protection.
9, to always adhere to the ventilation boring.
Corundum abrasive stone afraid of too much humidity. Corundum stone water vapor will occur hydration, hydrolysis and carbonated effect occurring water spots, bleaching, weathering, erosion, rust, yellow and other diseases, ruined stone. Thus stone installation of ventilation to be always adhere boring.